auto-claim

Workflow 1: Claim Stage — Behavior (given / given-validation / discovery) × Mechanism (given / discovery)

Orchestrate the claim stage for: $ARGUMENTS. Two orthogonal constants drive everything: BEHAVIOR_SOURCE (where the behavior comes from + whether it is validated) and MECHANISM (who picks the mechanism method).

Overview

This skill chains sub-skills into a single automated pipeline. All combinations share Phases 0, 0.5, 1, 4.5, 5, and 5.5; they differ in how the claim(s) entering Phase 4.5 are produced (Phase 2 + the ideation Phases 3/3.5/4) and in what Phase 1.75 loads.

Behavior stage — BEHAVIOR_SOURCE decides the behavior origin, whether ideation runs, and whether the plan opens with an M0 phenomenon-validation gate:

• given (default) — the behavior is already specified in the direction / task.md and assumed to hold. Faithfully capture it (no ideation, no novelty, no M0) and go straight to the mechanism:

  /research-lit → faithful behavior capture (from task.md) → /research-refine-pipeline
  

• given-validation — the behavior is captured the same way (no mining, no ideation, no novelty) but its existence is validated first: the experiment plan opens with a hard M0 gate that the experiment stage runs before any mechanism compute.

  /research-lit → faithful behavior capture (from task.md) → /research-refine-pipeline (plan opens with M0)
  

• discovery — the behavior itself is mined: /mechanism-behavior-discovery sharpens a new candidate phenomenon, then full ideation generates and ranks mechanistic ideas; the plan opens with the M0 gate too.

  /research-lit → /idea-creator → /novelty-check → /impact-check → /research-review → /research-refine-pipeline
    (survey)      (brainstorm)    (verify novel)   (verify it     (critical feedback)  (refine method + plan)
                                                    matters)
  

  The final idea is selected by combined impact + novelty, with impact weighted first (a less-novel idea on an important problem outranks a novel idea nobody needs).

Mechanism stage — MECHANISM decides who picks the mechanism method:

• discovery (default) — the system routes. The claim stage loads /mechanism-explore (the domain-general strategy layer above /mechanism-skills) as a reference shaping the hypothesis direction (Phase 2) and experiment plan (Phase 4.5); the concrete family is chosen later by the experiment stage's /mechanism-skills routing.
• given — the user named the mechanism method/family in task.md (or the direction). Capture it (Phase 1.75) and record it in FINAL_PROPOSAL.md / EXPERIMENT_PLAN.md so the experiment stage commits it directly as CHOSEN_FAMILY — no routing, and /mechanism-explore is not needed to pick a direction. If no concrete mechanism method/family is named anywhere, stop with [mechanism] mechanism:given requires a mechanism method/family in task.md or the direction — none found.

/mechanism-explore and /mechanism-behavior-discovery are reference-only (principles, no executable phases, no new artifact).

Resource-Fidelity Harness (the reproduction combination). Iff BEHAVIOR_SOURCE = given AND MECHANISM = given, the claim stage captures the exact models / datasets / data sizes named in task.md as binding and writes resource_fidelity: strict into FINAL_PROPOSAL.md + EXPERIMENT_PLAN.md, so the experiment stage uses them as specified with no cost-driven downscaling (no smaller-model swap, no data subsetting). Every other combination leaves the marker unstamped (cost-aware). See Phase 2 and Phase 4.5.

The final deliverables are always idea-stage/IDEA_REPORT.md plus a refined proposal (refine-logs/FINAL_PROPOSAL.md) and experiment plan (refine-logs/EXPERIMENT_PLAN.md). discovery ranks generated ideas and pins the top one; given / given-validation enumerate the behavior/claims captured from task.md and route all of them into a single unified proposal and experiment plan.

Constants

• BEHAVIOR_SOURCE = given — Behavior stage. given (default): the behavior is already specified in task.md and assumed to hold — Phase 2 faithfully captures it, the ideation Phases 3/3.5/4 are skipped, and the plan carries no M0 gate. given-validation: same faithful capture (no mining, no ideation, no novelty), but Phase 4.5 opens the plan with an M0 phenomenon-validation gate so the experiment stage validates existence before any mechanism compute. discovery: Phase 1.75 first loads /mechanism-behavior-discovery to mine and sharpen a new candidate phenomenon (its five bars — Real / Non-obvious / Specific / Robust / Tractable — and its sharpening discipline), then the ideation Phases 2/3/3.5/4 generate + rank mechanistic ideas, and the plan opens with the M0 gate too. The claim only assumes the phenomenon (for given-validation / discovery); its real existence is tested by the experiment-stage M0 gate (/auto-experiment Phase 1.25), not at claim time. For given / given-validation, the behavior is taken from task.md when present, otherwise from the $ARGUMENTS direction (or a given_behavior the orchestrator clarified) — task.md is recommended but not required. The behavior must be concrete; a vague topic with no concrete behavior is handled by the Given-Behavior Comprehension Gate (orchestrator) and its backstop (Phase 1.75 / agents/claim.md step 0.6) — which switches to discovery or asks the user — not by a hard halt. Accepts given / given-validation / discovery (case-insensitive). When invoked via /auto, forwarded from /auto's BEHAVIOR_SOURCE flag through agents/claim.md. Pilot-related constants below (PILOT_*, MAX_PILOT_IDEAS, MAX_TOTAL_GPU_HOURS) and CHOSEN_IDEA apply only to BEHAVIOR_SOURCE=discovery (ideation) and are ignored for given / given-validation.

• MECHANISM = discovery — Mechanism stage. discovery (default): the system routes the mechanism family — Phase 1.75 loads /mechanism-explore to shape the hypothesis direction (Phase 2) and experiment plan (Phase 4.5); the concrete family is picked later by the experiment stage's /mechanism-skills routing. given: the user named the mechanism method/family in task.md (or the direction) — Phase 1.75 captures it and Phase 4.5 records it (chosen_mechanism: <method>) in the proposal/plan so the experiment stage commits it directly as CHOSEN_FAMILY (no routing; /mechanism-explore is not loaded). A behavioral-only reproduction (no mechanism claim) may instead declare itself behavioral-only → chosen_mechanism: not-applicable (experiment commits routing: not-applicable). If MECHANISM=given but neither a named method nor a behavioral-only declaration is present, stop with [mechanism] mechanism:given requires a named mechanism method/family OR an explicit behavioral-only declaration in task.md or the direction — none found. Accepts given / discovery (case-insensitive). When invoked via /auto, forwarded from /auto's MECHANISM flag through agents/claim.md. Resource fidelity: the harness marker resource_fidelity: strict is stamped iff BEHAVIOR_SOURCE=given AND MECHANISM=given (the reproduction combination); see Phase 2 / Phase 4.5.

• PILOT_MAX_HOURS = 4 — Skip any pilot experiment estimated to take > N hours per GPU. Flag as "needs manual pilot" in the report. (BEHAVIOR_SOURCE=discovery only.)

• PILOT_TIMEOUT_HOURS = 6 — Hard timeout: kill any running pilot that exceeds N hours. Collect partial results if available. (BEHAVIOR_SOURCE=discovery only.)

• MAX_PILOT_IDEAS = 3 — Run pilots for at most N top ideas in parallel. Additional ideas are validated on paper only. (BEHAVIOR_SOURCE=discovery only.)

• MAX_TOTAL_GPU_HOURS = 10 — Total GPU budget across all pilots. If exceeded, skip remaining pilots and note in report. (BEHAVIOR_SOURCE=discovery only.)

• AUTO_PROCEED = true — When true (default), every checkpoint skips the AskUserQuestion UI call entirely and proceeds with the recommended option — there is no timer and no waiting. When false, each checkpoint calls AskUserQuestion and blocks until the user responds (so an unattended run with AUTO_PROCEED=false can deadlock indefinitely; wrap with timeout externally if you need a hard cap).

• RESUME = false — When true, each phase checks if its primary artifact already exists non-empty and skips itself if so. Useful for picking up after a crash or for re-running only the missing phases. Default false = every phase always runs and overwrites prior artifacts. Resume never deletes pre-existing files.

• REVIEWER_BACKEND = llm-chat — External LLM reviewer via llm-chat MCP (model defers to LLM_MODEL env). Always ask the external reviewer for strict, high-rigor feedback. Each sub-skill (/research-lit, /idea-creator, /novelty-check, /impact-check, /research-review, /research-refine-pipeline) declares the same default independently — this constant is NOT forwarded by /auto-claim. To switch backend for a specific sub-skill (e.g., oracle-pro for GPT-5.4 Pro via Oracle MCP), pass — reviewer: <name> when invoking that sub-skill directly.

• OUTPUT_DIR = idea-stage/ — All idea-stage outputs go here. Create the directory if it doesn't exist.

• ARXIV_DOWNLOAD = false — When true, /research-lit downloads the top relevant arXiv PDFs during Phase 1. When false (default), only fetches metadata. Passed through to /research-lit.

• COMPACT = false — When true, generate compact summary files for short-context models and session recovery. Writes idea-stage/IDEA_CANDIDATES.md (top 3-5 ideas only) at the end of this workflow. Downstream skills read this instead of the full idea-stage/IDEA_REPORT.md.

• REF_PAPER = false — Reference paper to base ideas on. Accepts: local PDF path, arXiv URL, or any paper URL. When set, the paper is summarized first (idea-stage/REF_PAPER_SUMMARY.md), then idea generation uses it as context. Combine with base repo for "improve this paper with this codebase" workflows.

• CHOSEN_IDEA = 1 — (BEHAVIOR_SOURCE=discovery only; ignored for given / given-validation.) 1-based rank of the idea (from idea-stage/IDEA_REPORT.md's Ranked Ideas section) that Phase 4.5 refines into FINAL_PROPOSAL.md + EXPERIMENT_PLAN.md. Default 1 = the top-ranked idea (current behavior). Set to 2, 3, … to refine a backup idea instead — used by /auto's Claim Gate "switch " branch (agents/claim.md forwards the value, and pre-deletes the prior proposal/plan so this skill's resume check sees them missing and re-runs Phase 4.5). When CHOSEN_IDEA > 1, Phase 4.5 rewrites only those two files; IDEA_REPORT.md, novelty checks, and external review (Phases 1–4) are kept intact since they are idea-agnostic at the ranked-list level. For given / given-validation there is no ranking and no selection — all captured behavior/claims are refined together — so the value is silently ignored (with a one-line warning if it was explicitly set).

💡 Standalone overrides: /auto-claim — behavior-source: given, mechanism: given (faithfully reproduce the claims in task.md), /auto-claim "direction" — behavior-source: discovery, — ref-paper: https://arxiv.org/abs/2406.04329, — compact: true, or — chosen-idea: 2 (behavior-source: discovery only; re-refines onto idea #2, requires IDEA_REPORT.md to already exist non-empty).

Pipeline

Resume protocol (only when RESUME = true)

Skip entirely if RESUME = false (default).

When true, each phase below begins with a skip-if-present check. The protocol is uniform:

1. Test the phase's primary artifact with [ -s <path> ] (exists and non-empty).
2. If present: log [resume] phase <N> skipped — <artifact> exists and proceed to the next phase without invoking the sub-skill.
3. If absent or empty: run the phase normally.

Phase ↔ primary artifact mapping:

Phase	Modes	Primary artifact (skip key)
0.5	both	idea-stage/REF_PAPER_SUMMARY.md
1	both	Side files idea-stage/RESEARCH_LIT.md (raw retrieval dump, audit-only) and idea-stage/LANDSCAPE.md (synthesized landscape, read from disk by Phase 2 in both modes) are written by /research-lit. Neither is a skip key — Phase 1 is gated jointly with Phase 2 (and Phase 3 in discovery) on IDEA_REPORT.md. If IDEA_REPORT.md is missing, Phase 1 re-runs and overwrites both side files fresh.
1.75	all	None — context-only load of /mechanism-explore (when MECHANISM=discovery) + /mechanism-behavior-discovery (when BEHAVIOR_SOURCE=discovery) + mechanism-method capture (when MECHANISM=given); no artifact. It always runs; resume never skips it (it is cheap and its guidance must be in context for Phase 2 / Phase 4.5).
Claim-production block (discovery: 1–3.5 / given·given-validation: 1–2)	all	idea-stage/IDEA_REPORT.md — if present non-empty, treat the whole block as a single skip unit and jump to Phase 4 (discovery) or Phase 4.5 (given / given-validation).
4	BEHAVIOR_SOURCE=discovery only	idea-stage/IDEA_REPORT.md containing a non-empty ## External Review section — same file as the block above, but a finer-grained sub-check: Phase 4 only re-runs if the file exists yet has no ## External Review.
4.5	all	refine-logs/FINAL_PROPOSAL.md and refine-logs/EXPERIMENT_PLAN.md (both required). discovery override: when CHOSEN_IDEA != 1, ignore this skip key and re-run Phase 4.5 unconditionally — the existing proposal/plan are scoped to the previously-chosen idea and would be silently kept stale otherwise. Standalone discovery callers should pre-clean with rm -f refine-logs/FINAL_PROPOSAL.md refine-logs/EXPERIMENT_PLAN.md (the orchestrator's agents/claim.md does this automatically); even without the pre-clean this override forces Phase 4.5 to re-run. given / given-validation have no equivalent override since there is no per-idea selection.
5	both	Always runs (cheap report rewrite that ensures the file reflects current state).
5.5	both	idea-stage/IDEA_CANDIDATES.md (only relevant when COMPACT = true).

Why the claim-production block shares one skip key. LANDSCAPE.md is intentionally not a skip key — a stale or partial landscape from an interrupted run is not trustworthy, so re-running Phase 1 to overwrite it cleanly is preferable to silently consuming it. The cost is re-doing retrieval when only a later phase failed; the benefit is that Phase 2 always reads a LANDSCAPE.md produced by the same successful Phase 1 within the current run.

Resume never deletes pre-existing files. If you want to force a phase to re-run, delete its primary artifact before invoking the skill.

Phase 0: Load Research Brief (if available)

Before starting any other phase, check for a detailed research brief in the project:

1. Look for task.md in the project root (or path passed as $ARGUMENTS)
2. If found, read it and extract:
   • Problem statement and context
   • Claims
   • Resources
   • Constraints (compute, data, timeline, venue)
   • What the user already tried / what didn't work
   • Domain knowledge and non-goals
   • Other tips
   • Existing results (if any)
3. Use this as the primary context for all subsequent phases — it replaces the one-line prompt
4. If both task.md and a one-line $ARGUMENTS exist, merge them (brief takes priority for details, argument sets the direction)

Phase 0.5: Reference Paper Summary (when REF_PAPER is set)

Skip entirely if REF_PAPER is false.

Summarize the reference paper before searching the literature:

1. If arXiv URL (e.g., https://arxiv.org/abs/2406.04329):

   • Invoke /arxiv "ARXIV_ID" — download to fetch the PDF
   • Read the first 5 pages (title, abstract, intro, method overview)

2. If local PDF path (e.g., papers/reference.pdf):

   • Read the PDF directly (first 5 pages)

3. If other URL:

   • Fetch and extract content via WebFetch

4. Generate idea-stage/REF_PAPER_SUMMARY.md:

# Reference Paper Summary

**Title**: [paper title]
**Authors**: [authors]
**Venue**: [venue, year]

## What They Did
[2-3 sentences: core method and contribution]

## Key Results
[Main quantitative findings]

## Limitations & Open Questions
[What the paper didn't solve, acknowledged weaknesses, future work suggestions]

## Potential Improvement Directions
[Based on the limitations, what could be improved or extended?]

## Codebase
[If `base repo` is also set: link to the repo and note which parts correspond to the paper]

🚦 Checkpoint: Present the summary to the user:

📄 Reference paper summarized:
- Title: [title]
- Key limitation: [main gap]
- Improvement directions: [2-3 bullets]

Proceeding to literature survey with this as context.

Phase 1 and Phase 2 will use idea-stage/REF_PAPER_SUMMARY.md as additional context — /research-lit searches for related and competing work, /idea-creator generates ideas that build on or improve the reference paper.

Phase 1: Literature Survey

Invoke /research-lit to map the research landscape:

/research-lit "$ARGUMENTS"

What this does:

• Search Zotero, Obsidian, local PDFs, the web, and the cloud mechanic-db SEARCH service (via the skill /mechanic-db-search) for relevant papers
• Build a landscape map: sub-directions, approaches, open problems
• Identify structural gaps and recurring limitations
• Output two files: idea-stage/RESEARCH_LIT.md (raw retrieval dump, audit-only) and idea-stage/LANDSCAPE.md (synthesized landscape — Phase 2 reads this from disk)

🚦 Checkpoint: Present the landscape summary to the user. Ask:

📚 Literature survey complete. Here's what I found:
- [key findings, gaps, open problems]

Does this match your understanding? Should I adjust the scope before proceeding?

Gating rule (no timer; AUTO_PROCEED controls whether the UI prompt is shown at all):

• AUTO_PROCEED=true (default) — skip the prompt entirely and proceed to Phase 2 (idea generation when BEHAVIOR_SOURCE=discovery; faithful behavior capture when given / given-validation).
• AUTO_PROCEED=false — call AskUserQuestion, block until the user answers:
  • approves → proceed to Phase 2.
  • requests changes (e.g., "focus more on X", "ignore Y", "too broad") → refine the search with updated queries, re-run /research-lit with adjusted scope, and present again. Repeat until the user is satisfied.

Phase 1.75: Mechanism Strategy Load + Behavior/Mechanism Capture

This phase loads strategy into context and captures user-pinned inputs; it writes no artifact. It is a reference step — its job is to put the relevant strategy skills in context so Phase 2 (hypothesis direction) and Phase 4.5 (experiment plan) can apply them, and to record a user-given mechanism method when MECHANISM=given. Three independent decisions:

(a) Behavior strategy — branch on BEHAVIOR_SOURCE:

• given / given-validation — precondition: the behavior must be concretely specified (a specific, falsifiable model-observable output pattern, ideally with its triggering condition) in the direction / task.md, or supplied as a given_behavior resolved by the orchestrator's Given-Behavior Comprehension Gate. If only a bare topic / research direction is present (e.g. "explore the mechanics of LLM beliefs") with no concrete behavior and no given_behavior, do not let Phase 2 silently invent one and do not silently fall back to discovery — apply the comprehension backstop (agents/claim.md step 0.6): always AskUserQuestion (switch-to-discovery, recommended / specify-behavior) and wait, regardless of AUTO_PROCEED (a vague given direction is a decision only the user can make — no timeout, no auto-fallback). On switch-to-discovery, proceed as BEHAVIOR_SOURCE=discovery below. /mechanism-behavior-discovery is not loaded for given / given-validation (the behavior is taken from task.md, not mined). Log [behavior-strategy] <given|given-validation> — behavior taken from task.md (no mining).
• discovery — invoke /mechanism-behavior-discovery and read its SKILL.md in full (the standard for finding, sharpening, and validating a new behavioral phenomenon — the five bars Real / Non-obvious / Specific / Robust / Tractable, the discovery strategies, and the validation discipline). It decides what behavior is worth explaining. Log [behavior-strategy] discovery — loaded /mechanism-behavior-discovery.

(b) Mechanism strategy — branch on MECHANISM:

• discovery (default) — invoke /mechanism-explore via the Skill tool and read its SKILL.md in full; the strategy shapes how to explain the behavior (the hypothesis direction in Phase 2 and the experiment plan in Phase 4.5). The concrete family is chosen later by the experiment stage. Log [mechanism-strategy] discovery — loaded /mechanism-explore.

• given — do not load /mechanism-explore (no direction to pick — the method is user-given). Two acceptable inputs:

  • A named mechanism method/family in task.md (or the direction) → capture it verbatim and hold it as chosen_mechanism; Phase 4.5 records it so the experiment stage commits it as CHOSEN_FAMILY.
  • An explicit behavioral-only declaration (the work makes no mechanism claim — e.g. a pure behavioral-claim reproduction such as verifying accuracy gaps / asymmetries) → set chosen_mechanism: not-applicable; Phase 4.5 records it, the orchestrator forwards CHOSEN_FAMILY=not-applicable, and the experiment stage commits routing: not-applicable and runs no mechanism milestone.

  Only if neither a named method nor a behavioral-only declaration is present, stop with [mechanism] mechanism:given requires a named mechanism method/family OR an explicit behavioral-only declaration in task.md or the direction — none found. Log [mechanism-strategy] given — captured chosen_mechanism="<method | not-applicable>".

Hold the loaded guidance in context for the rest of the run — do not copy it into any output file.

What the loaded strategy is used for (advisory — it never relaxes /idea-creator's novelty / feasibility / pilot filtering):

• Phase 2 (hypothesis direction) — frame candidate ideas as falsifiable mechanistic hypotheses (name the implicated internal object and the predicted causal relation) with at least one "boring" null (memorization / surface feature / shortcut), and favor ideas on a climbable ladder of evidence. When BEHAVIOR_SOURCE = discovery, the upstream step first surfaces and sharpens candidate phenomena (per /mechanism-behavior-discovery); the claim assumes the chosen phenomenon exists and attaches the mechanistic hypothesis — its actual existence is tested later by the experiment-stage M0 gate, not asserted here.
• Phase 4.5 (experiment plan) — shape the plan to climb the ladder of evidence: a cheap correlational/attribution screen to localize candidates → a causal intervention (ablation / patching / steering) to confirm the survivors → matched-control + off-target + confound checks for specificity. Each intervention milestone records the expected sign, magnitude / dose-response, and a specificity control. When BEHAVIOR_SOURCE ∈ {given-validation, discovery}, the plan opens with a phenomenon-validation gate (M0); the experiment stage runs M0 first and proceeds to the mechanism milestones only on a four-state verdict of established / conditional (see Phase 4.5 and /auto-experiment Phase 1.25). BEHAVIOR_SOURCE = given has no M0.

Phase 2: Produce the Claims to Verify

This phase writes idea-stage/IDEA_REPORT.md, the list of claims that Phase 4.5 will refine into a proposal and experiment plan. The behavior depends on BEHAVIOR_SOURCE.

In BEHAVIOR_SOURCE = discovery — idea generation, filtering, and pilots.

Invoke /idea-creator with the landscape context (and idea-stage/REF_PAPER_SUMMARY.md if available):

/idea-creator "$ARGUMENTS"

What this does:

• If idea-stage/REF_PAPER_SUMMARY.md exists, include it as context — ideas should build on, improve, or extend the reference paper.
• Read idea-stage/LANDSCAPE.md from disk (written by Phase 1 / /research-lit), then brainstorm 8–12 concrete ideas via the external LLM reviewer (llm-chat).
• Filter by feasibility, compute cost, quick novelty search.
• Deep-validate top ideas (full novelty check + devil's advocate).
• Run parallel pilot experiments on available GPUs (top ideas, up to MAX_PILOT_IDEAS).
• Rank by empirical signal.
• Output idea-stage/IDEA_REPORT.md with a ## Ranked Ideas section.

Apply the Phase 1.75 mechanism strategy. When MECHANISM=discovery, pass /mechanism-explore's framing into /idea-creator so each generated idea is stated as a falsifiable mechanistic hypothesis (internal object + predicted causal relation + at least one boring null), and bias ranking toward ideas with a climbable ladder of evidence. (When MECHANISM=given, no /mechanism-explore direction was loaded — the captured chosen_mechanism is the method, so frame ideas around testing the behavior with that method.) BEHAVIOR_SOURCE = discovery always first applies /mechanism-behavior-discovery to surface and sharpen candidate phenomena from the landscape (state each crisply per the five bars and screen plausibility) — the claim assumes the chosen phenomenon exists and attaches a mechanistic hypothesis; the phenomenon's actual existence is tested by the M0 gate in the experiment stage, not claimed here. This shapes idea framing only — novelty, feasibility, and pilot filtering are unchanged.

🚦 Checkpoint: Present the ranked ideas to the user.

💡 Generated X ideas, filtered to Y, piloted Z. Top results:

1. [Idea 1] — Pilot: POSITIVE (+X%)
2. [Idea 2] — Pilot: WEAK POSITIVE (+Y%)
3. [Idea 3] — Pilot: NEGATIVE, eliminated

Which ideas should I validate further? Or should I regenerate with different constraints?

Gating rule (no timer; AUTO_PROCEED controls whether the UI prompt is shown at all):

• AUTO_PROCEED=true (default) — skip the prompt entirely and proceed to Phase 3 with the top-ranked ideas.
• AUTO_PROCEED=false — call AskUserQuestion, block until the user answers:
  • picks ideas → proceed to Phase 3 with the chosen set.
  • unhappy with all ideas → collect feedback ("what's missing?", "what direction do you prefer?"), update the prompt with the user's constraints, and re-run Phase 2. Repeat until the user selects at least 1 idea.
  • wants to adjust scope → go back to Phase 1 with a refined direction.

In BEHAVIOR_SOURCE ∈ {given, given-validation} — faithful behavior/claim capture from task.md.

No idea-generation sub-skill is invoked. The orchestrator captures the behavior (and any claims stated about it) directly from task.md, using idea-stage/LANDSCAPE.md only as supporting context (e.g., to identify standard baselines, datasets, or metric definitions referenced by the behavior). The landscape never overrides what task.md says. given and given-validation capture identically — they differ only downstream in Phase 4.5 (given-validation opens the plan with M0; given does not).

Extraction rules — be faithful, not literal. The point is to turn the claims as the user wrote them into well-formed, individually verifiable predicates, without altering their meaning.

Allowed	Forbidden
Split one paragraph into multiple independent verifiable sub-claims when it bundles several.	Changing the semantics, direction, or strength of any claim.
Merge duplicated or restated claims from different parts of task.md into one.	Adding assertions that task.md does not state or clearly imply.
Rewrite vague or colloquial phrasing into a measurable predicate (subject, target, metric, direction made explicit).	Dropping any claim that task.md explicitly states.
Add structural fields (Hypothesis, Measurable predicate, Expected direction) derived strictly from task.md's wording.	"Critically tightening" a claim's scope to make it easier to verify — that is Phase 4.5's job on the testing method, not Phase 2's job on the claim.

Every extracted claim must carry an Original field with the exact source excerpt, so any later phase can audit faithfulness end-to-end.

Resource capture. Alongside each captured behavior/claim, record the experimental resources task.md specifies — model(s) (full id / size), dataset(s), and required data size / split (used_n). In the reproduction combination (BEHAVIOR_SOURCE=given + MECHANISM=given) these are binding (the downstream plan and runs must use them as specified, no cost-driven substitution); Phase 4.5 stamps them as resource_fidelity: strict and the experiment stage enforces them. In every other combination they are recorded as the user's preferred resources and remain cost-aware — but "cost-aware" is minimize cost subject to the science, within the declared budget, not "always pick the cheapest". Read any GPU / compute budget declared in task.md: when the declared budget covers the user's preferred full-scale model / data, plan at that full scale (set used_n = available_n, use the named model at full size) rather than a cheaper default — the experiment stage may only scale them down when the budget genuinely does not cover the full run, and then it stops and surfaces it rather than silently downscaling (see /auto-experiment GPU-budget rule). When no budget is declared, stay cost-aware but still avoid gratuitous downscaling of the user's named resources — record them at full scale unless a cheaper screen is scientifically (ladder-of-evidence), not merely cost-, justified. If task.md names them globally rather than per-claim, capture them once in a top-level ## Resources block (label it (binding) only under the reproduction combination) and reference it. If a required resource is unspecified in task.md, record it as unspecified — to be resolved in Phase 4.5 rather than inventing a cheaper default.

Output schema — idea-stage/IDEA_REPORT.md for given / given-validation:

# Idea Report — Captured Behavior

**Behavior-source**: <given | given-validation>
**Mechanism**: <given | discovery>
**Claim source**: task.md (faithful capture)
**Date**: [today]

## Claims to Verify

### Claim 1: <short title>

**Original (verbatim excerpt from task.md):**
> <quoted source text>

**Extracted statement**: <cleaned, measurable form>
**Hypothesis**: H1 — <one sentence>
**Measurable predicate**: <metric on dataset under condition satisfies …>
**Expected direction**: <up | down | equal | threshold>
**Resources (binding)**: model(s): <exact id / size>; dataset(s): <name>; used_n: <required size / split> — *(exact, as task.md specifies; "unspecified — resolve in Phase 4.5" if absent)*
**Status**: pending verification
**Notes**: <e.g., "split from §2 ¶3"; "merged with the duplicate at §4"; "metric inferred from task.md's evaluation paragraph">

### Claim 2: <short title>
…

🚦 Checkpoint: Present the extracted claims to the user.

🧾 Extracted N claim(s) from task.md:

1. [Claim 1 title] — [one-line measurable predicate]
2. [Claim 2 title] — [one-line measurable predicate]
…

Did I miss, merge, or misread any claim? If so, point it out and I'll re-extract.

Gating rule:

• AUTO_PROCEED=true (default) — skip the prompt entirely and proceed to Phase 4.5 with all captured behavior/claims (Phases 3 and 4 are skipped for given / given-validation).
• AUTO_PROCEED=false — call AskUserQuestion and block:
  • approves → proceed to Phase 4.5.
  • flags a missed / wrong / over-merged claim → re-capture with the user's correction and present again.

Phase 3: Deep Novelty Verification (BEHAVIOR_SOURCE=discovery only)

Skip entirely unless BEHAVIOR_SOURCE = discovery. given / given-validation do not perform novelty checks — the behavior comes from task.md and is taken as given, not assessed for prior-art uniqueness.

For each top idea (positive pilot signal), run a thorough novelty check:

/novelty-check "[top idea 1 description]"
/novelty-check "[top idea 2 description]"

What this does:

• Multi-source literature search (arXiv, Scholar, Semantic Scholar)
• Cross-verify with the external LLM reviewer
• Check for concurrent work (last 3-6 months)
• Identify closest existing work and differentiation points

Update idea-stage/IDEA_REPORT.md with deep novelty results. Eliminate any idea that turns out to be already published.

Phase 3.5: Deep Impact Verification (BEHAVIOR_SOURCE=discovery only)

Skip entirely unless BEHAVIOR_SOURCE = discovery. given / given-validation take the behavior in task.md as given and do not weigh its importance.

For each idea that survived novelty (Phase 3), run an impact check on the problem/behavior it studies:

/impact-check "[top idea 1 — behavior/problem + hypothesis]"
/impact-check "[top idea 2 — behavior/problem + hypothesis]"

What this does: judges whether the studied problem/behavior is important — solves a real problem, is likely to be used/cited, could shift a field's direction, helps applications/industry/society/cross-disciplinary work, or reveals an important phenomenon even with a simple method. Outputs Impact: X/10 + PROCEED / PROCEED WITH CAUTION / DEPRIORITIZE.

Update idea-stage/IDEA_REPORT.md and re-rank. Add an Impact: X/10 line to each surviving idea, then re-order the ## Ranked Ideas list by impact first, novelty second — impact dominates the ranking and novelty only breaks ties. Move low-impact ideas down (deprioritize); eliminate one only if its impact is clearly negligible. This impact-first order is exactly what Phase 4.5's CHOSEN_IDEA indexes into, so the top-ranked idea is the one that best combines importance and newness.

Phase 4: External Critical Review (BEHAVIOR_SOURCE=discovery only)

Skip entirely unless BEHAVIOR_SOURCE = discovery. given / given-validation do not run a separate external review at this stage — /research-refine-pipeline (Phase 4.5) already performs its own iterative external review of the testing method and experiment plan, which is the right place to scrutinize how each claim will actually be verified.

For the surviving top idea(s), get brutal feedback:

/research-review "[top idea with hypothesis + pilot results]"

What this does:

• The external LLM reviewer acts as a senior reviewer (NeurIPS/ICML level)
• Scores the idea, identifies weaknesses, suggests minimum viable improvements
• Provides concrete feedback on experimental design

Update idea-stage/IDEA_REPORT.md with reviewer feedback and revised plan.

Phase 4.5: Method Refinement + Experiment Planning

Step 0 — Resolve what to refine. The behavior depends on BEHAVIOR_SOURCE.

In BEHAVIOR_SOURCE = discovery (uses the CHOSEN_IDEA constant, default 1):

1. Open idea-stage/IDEA_REPORT.md's ## Ranked Ideas section and enumerate the surviving (non-eliminated) ideas in rank order (this order is the impact-first, novelty-second ranking written by Phase 3.5). The N-th surviving entry corresponds to CHOSEN_IDEA = N.
2. If CHOSEN_IDEA > number of surviving ideas, log [chosen-idea] requested N=<N> but only <K> ideas survived ranking — falling back to N=1 and use idea #1 (the top idea). This guards against an orchestrator forwarding a stale rank after eliminations.
3. Extract that idea's title, hypothesis, pilot results, and reviewer feedback. These four things feed /research-refine-pipeline below.
4. Log [chosen-idea] refining idea #<N> — "<title>" so the run history is explicit about which backup was picked when N > 1.

When CHOSEN_IDEA != 1, also confirm that the prior refine-logs/FINAL_PROPOSAL.md + refine-logs/EXPERIMENT_PLAN.md are absent (agents/claim.md deletes them before invoking this skill; standalone callers must pre-clean manually). If they are present, refuse to overwrite silently: log [chosen-idea] N=<N> but stale proposal/plan present — refusing to silently overwrite; delete refine-logs/FINAL_PROPOSAL.md and refine-logs/EXPERIMENT_PLAN.md before re-invoking and stop.

In BEHAVIOR_SOURCE ∈ {given, given-validation}:

1. Open idea-stage/IDEA_REPORT.md's ## Claims to Verify section and load all captured behavior/claims. There is no ranking step and no selection — every one is carried forward. If CHOSEN_IDEA was explicitly set, log [chosen-idea] CHOSEN_IDEA applies only to BEHAVIOR_SOURCE=discovery and is being ignored and continue.
2. Build the refinement input as: the full claim list (each with its Original excerpt, Extracted statement, Hypothesis, Measurable predicate, and Expected direction) plus the landscape context from idea-stage/LANDSCAPE.md. There are no pilot results and no external-review feedback to attach — /research-refine-pipeline refines the testing method and experiment plan around the behavior/claims, never the behavior/claims themselves.
3. Log [capture] refining unified proposal covering <N> behavior/claim(s).

Step 1 — Refine. Invoke /research-refine-pipeline with the input from Step 0.

In BEHAVIOR_SOURCE = discovery:

/research-refine-pipeline "[idea #CHOSEN_IDEA: title + description + pilot results + reviewer feedback]"

In BEHAVIOR_SOURCE ∈ {given, given-validation}:

/research-refine-pipeline "[N behavior/claims — each with title, original excerpt, extracted statement, hypothesis, measurable predicate, expected direction; plus landscape context from idea-stage/LANDSCAPE.md]"

What /research-refine-pipeline does:

• Freeze a Problem Anchor to prevent scope drift. For discovery the anchor is the idea's problem statement; for given / given-validation the anchor is the set of behavior/claims as captured in Phase 2 — they themselves never move.
• Iteratively refine the method / testing approach via external LLM review (up to 5 rounds, until score ≥ 9). For given / given-validation this refines only how to test (controls, ablations, metric choice, statistical power), never the behavior/claims.
• Generate a claim-driven experiment roadmap with ablations, budgets, and run order. For given / given-validation every milestone is tagged with which behavior/claim(s) it covers.
• (Mechanism milestones — ladder of evidence, from the Phase 1.75 strategy): shape the roadmap to climb the ladder of evidence — a cheap correlational/attribution screen to localize candidates → a causal intervention (ablation / patching / steering) to confirm the survivors → matched-control + off-target + confound milestones for specificity — and have each intervention milestone record the expected sign, magnitude / dose-response, and its specificity control. Because the concrete mechanism submethod is not chosen until the experiment stage (/auto-experiment Phase 1.5), any milestone field whose correct value depends on that submethod — typically n_pairs, intervention sites, the exact effect metric, and the per-run GPU-hours estimate — is necessarily provisional here. Tag each such milestone with a method_sensitive: [<field>, ...] line (English machine field, written verbatim regardless of report language) so the experiment stage knows which fields it may re-bind at routing time without it counting as a plan rewrite. This is omitted only under resource_fidelity: strict (the reproduction combo given+given), where these values are pinned exact and must not carry method_sensitive (see the strict bullet below). Every cost-aware combination keeps method_sensitive.
• (Mechanism stamp — branch on MECHANISM):

  • When MECHANISM=discovery, stamp a lightweight mechanism_strategy: block into the top metadata of refine-logs/EXPERIMENT_PLAN.md (and mirror it verbatim into refine-logs/FINAL_PROPOSAL.md) capturing the strategic decision taken from /mechanism-explore — which of the six research directions (Location / Causal Intervention / Tuning & Editing / Formation Tracing / Unit Interpretation / Decision Auditing) the plan pursues, in execution order, plus the directions deliberately not pursued with a one-line reason each. This is the audit anchor for the strategy decision, which otherwise evaporates when the claim agent's context closes (the /mechanism-explore skill itself writes no artifact). Shape (English machine fields; the free-text reasons follow the report language):

    mechanism_strategy:
      directions: [Location, Causal Intervention]   # in execution order
      rejected:
        - Tuning & Editing — <one-line why not>
        - Formation Tracing — <one-line why not>
      note: <one line tying the chosen directions back to this project's claim(s)>
    

  • When MECHANISM=given, no /mechanism-explore direction was loaded, so stamp mechanism_strategy: n/a (skip the block) and stamp chosen_mechanism: <the method/family captured in Phase 1.75, or not-applicable for a behavioral-only reproduction> into the top metadata of both files. The orchestrator reads chosen_mechanism and forwards it to the experiment stage as CHOSEN_FAMILY — committing the named family directly (Phase 1.5 Mode B) with no routing, or routing: not-applicable when the value is not-applicable.

• (Phenomenon-validation gate M0 — BEHAVIOR_SOURCE ∈ {given-validation, discovery}): the claim only assumes the phenomenon exists; whether it is real is tested in the experiment stage, not here. So the roadmap's first milestone is a hard gate that must carry the machine marker kind: phenomenon-validation (the title may be phrased / localized freely — the experiment stage detects it by this field, never by the title). With an explicit pass criterion:
  • reproduces across paraphrase, seed, and decoding settings (not one exact string);
  • confounds controlled (length, token frequency, position, format, label identity, few-shot leakage);
  • statistical reality — sample size large enough to clear noise (honor task.md / project minimums; ≥ ~50 by default), with variability reported, not a single number;
  • the trivial-explanation check ruled out (tokenizer / sampling / eval-bug). All mechanism milestones (M1…Mn) declare depends_on: [M0]. The experiment stage (/auto-experiment Phase 1.25) runs M0 first and branches on a four-state verdict: established → run the mechanism milestones; conditional → restrict mechanism analysis to the conditions where the phenomenon holds (runtime scoping — the experiment stage does not rewrite this plan), and tag the claim conditional; not-established → stop the pipeline and write a negative-result report (skip verify + iteration); inconclusive (M0 test itself broken/underpowered) → fix & re-run M0 at the script/run level, never run mechanism on an untested phenomenon. BEHAVIOR_SOURCE = given produces NO M0 — the behavior is taken as already validated by prior work, so the plan goes straight to the mechanism milestones, and those milestones must NOT declare depends_on: [M0] (there is no M0 to wait on — a dangling depends_on: [M0] would deadlock the queue). The M0 milestone + depends_on: [M0] rule above applies to given-validation and discovery only.
• (Resource-Fidelity Harness — reproduction combo given+given only): iff BEHAVIOR_SOURCE=given AND MECHANISM=given, the plan must use the exact models / datasets / data sizes captured in Phase 2, at the specified scale. Forbidden in the plan: substituting a smaller / cheaper model, subsetting or down-sampling the data, or dropping a must-run experiment to save compute. Stamp resource_fidelity: strict into the top metadata of both FINAL_PROPOSAL.md and EXPERIMENT_PLAN.md, and set each milestone's planned used_n to the full specified amount. The experiment stage reads this marker and enforces the harness downstream. Every other combination leaves the marker unstamped (cost-aware).
• Output: refine-logs/FINAL_PROPOSAL.md, refine-logs/EXPERIMENT_PLAN.md, refine-logs/EXPERIMENT_TRACKER.md.

EXPERIMENT_TRACKER.md ownership (planning level). Phase 4.5 writes the tracker as a plan-level table: one row per planned run, with Status set to pending and Notes / result columns empty. The file is not rewritten downstream; /auto-experiment Phase 5 updates rows in place (flips Status from pending → running → done / failed and fills in result/notes columns) and appends rows only when Phase 5.6 plans new ablations. /auto-iteration-loop does not touch this file at all — iteration-round runs live under runs/iteration_round_<N>/ and are tracked in review-stage/AUTO_REVIEW.md instead. This split keeps the plan-driven audit trail (this file) separate from the iteration-driven audit trail (the review log).

EXPERIMENT_PLAN.md shape (queue-aware). Each milestone block in EXPERIMENT_PLAN.md MAY declare two queue-related fields so /auto-experiment Phase 4.0 can route to /experiment-queue instead of /run-experiment:

• depends_on: [<milestone-name>, ...] — this milestone's runs must wait until every listed upstream milestone is completed before launching. Use for teacher → student chains, baseline → ablation chains, or any phase where a downstream run needs an upstream artifact (checkpoint, dataset, calibration result). The names refer to other milestone blocks in the same EXPERIMENT_PLAN.md.
• grid: { <param-name>: [<value>, <value>, ...], ... } — Cartesian-product expansion. Each combination produces one run with the params substituted via ${param-name} placeholders into the milestone's cmd: template. Use for multi-seed sweeps (e.g., grid: { seed: [42, 200, 201], n_hidden: [64, 128, 256], n_train_subset: [50000, 150000, 500000] } → 27 runs). When grid: is present, the milestone's cmd: is treated as a template (rather than a literal command) and id: may also be a template (e.g., s${seed}_N${n_hidden}_n${n_train_subset}).
• kind: phenomenon-validation — stable machine marker identifying the M0 phenomenon-validation gate (BEHAVIOR_SOURCE ∈ {given-validation, discovery} only). This is the canonical signal /auto-experiment Phase 1.25 keys on — not the milestone's title. The marker is an English machine field (per the Output-language protocol) and must be written verbatim regardless of the report language, so the title heading may be phrased / localized freely. A given-validation / discovery plan has exactly one kind: phenomenon-validation milestone (M0); given plans have none.
• method_sensitive: [<field>, ...] — per intervention milestone. Lists the milestone fields whose correct value depends on the mechanism submethod that is bound at /auto-experiment Phase 1.5 (typically n_pairs, sites, metric, gpu_hours). It licenses the experiment stage to re-bind those fields at routing/commit time and record the delta in MECHANISM_ROUTING.md — without rewriting this plan (see /auto-experiment Phase 1.5 "Plan reconciliation"). Omit entirely under resource_fidelity: strict (the reproduction combo pins these exact); kept in every cost-aware combination.

In addition to the per-milestone fields above, EXPERIMENT_PLAN.md carries top-metadata machine markers stamped by Phase 4.5: resource_fidelity: strict (reproduction combo only — the harness switch), mechanism_strategy: (the strategic-direction block above when MECHANISM=discovery; n/a when MECHANISM=given), and chosen_mechanism: <method> (only when MECHANISM=given — the user's committed mechanism family).

A milestone with either depends_on or grid (or ≥10 listed runs even without those fields) triggers /auto-experiment Phase 4.B (queue dispatch). See /auto-experiment "Phase 4.0: Route by milestone size and dependencies" for the precise routing table.

Example queue-friendly milestone block:

### M2: Multi-seed main method
**Depends on**: M1 (baselines)
**Grid**:
  seed: [42, 200, 201]
  n_hidden: [64, 128, 256, 512]
  n_train_subset: [50000, 150000, 500000]
**Cmd template**: `python run_method.py --seed ${seed} --n_hidden ${n_hidden} --n_train_subset ${n_train_subset} --backbone softmax --K 500 --L 96`
**Expected output (template)**: `results/main_N${n_hidden}_seed${seed}_n${n_train_subset}.json`
**Priority**: MUST-RUN
**Estimated GPU-hours per run**: 1.5h

This produces 36 runs and routes to /experiment-queue automatically. For a small milestone (≤ 5 explicit runs, no depends_on, no grid), keep the legacy shape — /auto-experiment Phase 4.A handles it via per-run /run-experiment dispatches.

🚦 Checkpoint: Present the refined proposal summary.

In BEHAVIOR_SOURCE = discovery:

🔬 Method refined and experiment plan ready:
- Problem anchor: [anchored problem]
- Method thesis: [one sentence]
- Dominant contribution: [what's new]
- Must-run experiments: [N blocks]
- First 3 runs to launch: [list]

Proceed to implementation? Or adjust the proposal?

In BEHAVIOR_SOURCE ∈ {given, given-validation}:

🔬 Verification approach refined and experiment plan ready:
- Claims covered: [N claims, listed by title]
- Testing approach: [one sentence on how the suite verifies them]
- Must-run experiments: [N blocks, one or more per claim]
- First 3 runs to launch: [list]

Proceed to implementation? Or adjust the verification plan?

• User approves (or AUTO_PROCEED = true) → proceed to Phase 5 (Final Report).
• User requests changes → pass feedback to /research-refine for another round.

Phase 5: Final Report

Finalize idea-stage/IDEA_REPORT.md with all accumulated information. The template depends on BEHAVIOR_SOURCE.

In BEHAVIOR_SOURCE = discovery:

# Idea Discovery Report

**Direction**: $ARGUMENTS
**Behavior-source**: discovery
**Mechanism**: <given | discovery>
**Date**: [today]
**Pipeline**: research-lit → idea-creator → novelty-check → impact-check → research-review → research-refine-pipeline

## Executive Summary
[2-3 sentences: best idea, key evidence, recommended next step]

## Literature Landscape
[from Phase 1]

## Ranked Ideas
[from Phase 2, updated with Phase 3-4 results]

### 🏆 Idea 1: [title] — RECOMMENDED
- Pilot: POSITIVE (+X%)
- Impact: X/10 — why it matters: [importance + who would care] (ranked first)
- Novelty: CONFIRMED (closest: [paper], differentiation: [what's different])
- Reviewer score: X/10
- Next step: route to mechanism family (/mechanism-skills) → implement full experiment (/auto-experiment) → /auto-iteration-loop

### Idea 2: [title] — BACKUP
...

## Eliminated Ideas
[ideas killed at each phase, with reasons]

## Refined Proposal
- Proposal: `refine-logs/FINAL_PROPOSAL.md`
- Experiment plan: `refine-logs/EXPERIMENT_PLAN.md`
- Tracker: `refine-logs/EXPERIMENT_TRACKER.md`

## Next Steps
- [ ] /mechanism-skills to route the method to a concrete mechanism family + submethod (Workflow 1.25, emits `refine-logs/MECHANISM_ROUTING.md`)
- [ ] /auto-experiment to implement and deploy from the routing + plan (Workflow 1.5)
- [ ] /auto-verify to stress-test the resulting claims (Workflow 1.75)
- [ ] /auto-iteration-loop to iterate until submission-ready (Workflow 2)
- [ ] Or invoke /auto for the autonomous idea → routing → experiments → verify → review chain

In BEHAVIOR_SOURCE ∈ {given, given-validation}:

# Captured-Behavior Report

**Direction**: $ARGUMENTS (supplementary scope only — behavior/claims are sourced from task.md)
**Behavior-source**: <given | given-validation>
**Mechanism**: <given | discovery>
**Date**: [today]
**Pipeline**: research-lit → faithful behavior capture → research-refine-pipeline

## Executive Summary
[2-3 sentences: which claims will be verified, what the unified proposal covers, what to run first]

## Literature Landscape
[from Phase 1 — context for baselines, datasets, and metric definitions; never used to alter the claims]

## Claims to Verify
[from Phase 2 — full list, in extraction order]

### Claim 1: [title]
- Original (verbatim from task.md): [excerpt]
- Extracted statement: [cleaned predicate]
- Hypothesis: [one sentence]
- Measurable predicate: [metric on dataset under condition]
- Expected direction: [up | down | equal | threshold]
- Status: pending verification
- Verified by milestone(s): [link(s) to EXPERIMENT_PLAN.md]

### Claim 2: [title]
…

## Refined Proposal
- Proposal: `refine-logs/FINAL_PROPOSAL.md` (unified testing approach covering all claims)
- Experiment plan: `refine-logs/EXPERIMENT_PLAN.md` (milestones tagged with the claim(s) each verifies)
- Tracker: `refine-logs/EXPERIMENT_TRACKER.md`

## Next Steps
- [ ] /mechanism-skills to route the testing approach to a concrete mechanism family + submethod (Workflow 1.25)
- [ ] /auto-experiment to implement and run the verification suite (Workflow 1.5)
- [ ] /auto-verify to stress-test each verified claim under method/dataset/model swaps (Workflow 1.75)
- [ ] /auto-iteration-loop to iterate the verification suite until reviewer-ready (Workflow 2)
- [ ] Or invoke /auto for the autonomous claim → routing → experiments → verify → review chain

Phase 5.5: Write Compact Files (when COMPACT = true)

Skip entirely if COMPACT is false.

Write idea-stage/IDEA_CANDIDATES.md — a lean summary of the top entries from idea-stage/IDEA_REPORT.md. The schema depends on BEHAVIOR_SOURCE.

In BEHAVIOR_SOURCE = discovery — the top 3–5 surviving ideas:

# Idea Candidates

| # | Idea | Pilot Signal | Impact | Novelty | Reviewer Score | Status |
|---|------|-------------|--------|---------|---------------|--------|
| 1 | [title] | +X% | X/10 | Confirmed | X/10 | RECOMMENDED |
| 2 | [title] | +Y% | X/10 | Confirmed | X/10 | BACKUP |
| 3 | [title] | Negative | — | — | — | ELIMINATED |

## Active Idea: #1 — [title]
- Hypothesis: [one sentence]
- Key evidence: [pilot result]
- Next step: /mechanism-skills (Workflow 1.25, route to mechanism family) → /auto-experiment (Workflow 1.5, implement + deploy) — or /research-refine to revise the proposal first

In BEHAVIOR_SOURCE ∈ {given, given-validation} — every captured behavior/claim, no ranking:

# Claim Candidates

**Behavior-source**: <given | given-validation>
**Mechanism**: <given | discovery>
**Claim source**: task.md

| # | Claim | Measurable Predicate | Status |
|---|-------|----------------------|--------|
| 1 | [title] | [metric on dataset under condition] | pending verification |
| 2 | [title] | [metric on dataset under condition] | pending verification |
| … | …     | …                    | …                    |

## Active Plan
- Unified proposal: `refine-logs/FINAL_PROPOSAL.md`
- Milestones: see `refine-logs/EXPERIMENT_PLAN.md`
- Next step: /mechanism-skills (Workflow 1.25, route the testing approach) → /auto-experiment (Workflow 1.5, run the verification suite)

This file is intentionally small (~30 lines) so downstream skills and session recovery can read it without loading the full idea-stage/IDEA_REPORT.md.

Output Protocols

Follow these shared protocols for all output files:

• Output Versioning Protocol — write timestamped file first, then copy to fixed name
• Output Manifest Protocol — log every output to MANIFEST.md
• Output Language Protocol — respect the project's language setting

Key Rules

• Large file handling: If the Write tool fails due to file size, immediately retry using Bash (cat << 'EOF' > file) to write in chunks. Do NOT ask the user for permission — just do it silently.

• Don't skip phases beyond what BEHAVIOR_SOURCE already prescribes. Each phase filters or refines. Skipping a phase outside the prescribed flow leads to wasted effort or silently malformed outputs downstream.

• Checkpoint between phases. Briefly summarize what was found before moving on.

• discovery: kill ideas early. It's better to kill 10 bad ideas in Phase 3 than to implement one and fail.

• discovery: empirical signal > theoretical appeal. An idea with a positive pilot outranks a "sounds great" idea without evidence.

• given / given-validation: claim fidelity > convenience. Never simplify, narrow, or strengthen the captured behavior/claim to make it easier to verify — that distorts the result. Phase 4.5 may sharpen the testing method, never the behavior/claim.

• Document everything. Dead ends in discovery and faithfulness-audit decisions in given / given-validation capture (e.g., why two paragraphs were merged into one claim) are as valuable as the headline results.

• Be honest with the reviewer. In discovery, include negative pilot results and failures in the review prompt. In given / given-validation, surface any capture ambiguities to /research-refine-pipeline so the testing method accounts for them.

Composing with Downstream Workflows

After this pipeline produces a validated top idea (discovery) or a unified plan over the captured behavior/claims (given / given-validation), hand off to the next workflows in order:

/auto-claim "direction" [— behavior-source: given | given-validation | discovery, mechanism: given | discovery]   ← you are here (Workflow 1)
/mechanism-skills                    ← Workflow 1.25: route the method / testing approach to a mechanism family + submethod (skipped when MECHANISM=given — the family is already chosen)
/auto-experiment                     ← Workflow 1.5: implement + deploy from the routing + plan
/auto-verify                         ← Workflow 1.75: stress-test passed claims
/auto-iteration-loop [reviewer-context-only, optional]   ← Workflow 2: iterate until submission-ready. The optional arg is reviewer context only — NOT a starting point. Run /auto-claim + /auto-experiment + /auto-verify first if those artifacts don't exist.

Or use /auto for the autonomous claim → routing → experiments → verify → review chain (the `behavior-source` + `mechanism` flags drive the whole pipeline).