ring:running-dev-cycle-frontend

Frontend Development Cycle Orchestrator

When to use

• Starting a new frontend development cycle with a plan file (plan.md, canonical ring:writing-plans format; legacy tasks.md is accepted ONLY for cycles already in flight — current-cycle.json exists, init is not re-run)
• Resuming an interrupted frontend development cycle (--resume flag)
• After backend dev cycle completes (consuming handoff)

Skip when

• No plan file exists
• Task is documentation-only or planning-only
• Backend project — use ring:running-dev-cycle instead

Sequence

Runs before: ring:writing-dev-reports

You orchestrate. Agents execute. NEVER read/write/edit source files (*.ts, *.tsx, *.jsx, *.css) directly. All code changes go through Task(subagent_type=...). Announce at start: "Using ring:running-dev-cycle-frontend with lean gate flow (Gate 0, 7, 8)."

Step 0: Pre-Execution Setup (MANDATORY)

1. Detect UI library: Read package.json
   <!-- Replace @your-org/design-system with your organization's design system package. -->
   - "@your-org/design-system" present → ui_library_mode = "design-system"
   - Otherwise → ui_library_mode = "fallback-only"
   Store in state.

2. Pre-cache standards (once):
   WebFetch → https://raw.githubusercontent.com/LerianStudio/ring/main/CLAUDE.md
   WebFetch → https://raw.githubusercontent.com/LerianStudio/ring/main/dev-team/docs/standards/frontend.md
   WebFetch → testing-accessibility.md, testing-visual.md, testing-e2e.md, testing-performance.md, devops.md, sre.md
   Store in state.cached_standards.

3. Load backend handoff if available: docs/ring:running-dev-cycle/handoff-frontend.json

4. Verify PROJECT_RULES.md exists → STOP if missing.

5. Ask execution mode: automatic | manual_per_epic | manual_per_task

Gate Map

Gate	Cadence	Skill	Agent	Purpose
0	task	ring:implementing-tasks	ring:frontend / ring:ui-engineer / ring:bff-ts	TDD, coverage, accessibility, visual/E2E/perf checks, local runtime
0.5	task (conditional)	ring:applying-composition-patterns	ring:frontend	Composition refactoring when complexity signals detected
7	epic	ring:reviewing-code	9 defaults + triggered specialists via ring:reviewing-code	Code review
8	task	ring:validating-acceptance-criteria	User	Acceptance sign-off

All listed gates are MANDATORY. No exceptions.

Gate Agent Selection (Gate 0)

Condition	Agent
React/Next.js component	ring:frontend
Design system UI	ring:ui-engineer
BFF / API aggregation	ring:bff-ts
Mixed	frontend first, then bff-ts

Pass ui_library_mode to every Gate 0 agent.

Frontend TDD Policy

Component Layer	TDD Required?	When
Custom hooks	YES — RED→GREEN	Gate 0
Form validation	YES — RED→GREEN	Gate 0
State management	YES — RED→GREEN	Gate 0
Conditional rendering	YES — RED→GREEN	Gate 0
API integration	YES — RED→GREEN	Gate 0
Layout / styling	NO — test-after	Gate 0 visual checks
Animations	NO — test-after	Gate 0 visual checks
Static presentational	NO — test-after	Gate 0 visual checks

Execution Order

for each epic:
  for each task:
    Gate 0
    [checkpoint if manual_per_task]

  # epic-level (after all tasks)
  Gate 7

  # task-level validation after review passes
  for each task:
    Gate 8
    Skill("ring:committing-changes")  # commit task work after Gate 8 user approval

  [checkpoint if manual_per_epic]

  # phase boundary — fires once, after the last epic of the current phase
  [if epic is last in its phase: Phase Cadence (see below)]

Phase Boundary (Rolling Wave)

Phases group epics and are elaborated one at a time. After the last epic of the current phase completes its Gate 0/7/8 flow, fire the phase boundary exactly once:

1. Close the finished phase in the plan: set its `## Phase Overview` Status cell →
   `Complete` (Edit on the plan file; skip silently if the table is absent —
   FALLBACK single-phase plan).
2. Checkpoint with the user: summarize the completed phase (epics done, review/validation
   outcomes) and confirm intent to continue.
2.5. Ask the user: "Open a PR for this phase?" → if yes: `Skill("ring:opening-pull-requests")` (optional, never automatic).
3. Elaborate the next phase's tasks inline under each epic as `#### Task N.M.T:`
   blocks, following the ring:writing-plans Task Format (`- [ ] Done` checkbox
   immediately under the heading, then Context, Implementation vision, Files,
   Verification, Done when). Detail exactly one phase ahead — never further.
4. Set the newly elaborated phase's Phase Overview Status cell → `Detailed`.
5. Set state.current_phase to the next phase and resume execution from its first epic.

Epic **Status:** lifecycle writes (same contract as ring:running-dev-cycle): the plan's epic **Status:** line is the write target throughout the epic loop — Pending → Doing before the epic's first Gate 0, Doing → Done after the epic passes Gate 7/8 and its checkpoint, Doing → Failed on a hard block. Edit the plan file at each of these transitions, alongside the state write.

Do not elaborate more than one phase ahead — detail decays before execution reaches it.

Gate Execution Workflow (MANDATORY for every gate)

1. Skill("[sub-skill-name]")
2. Follow sub-skill dispatch rules
3. Task(subagent_type=...)
4. Validate output
5. Write state
6. Next gate

Sub-skill MUST be loaded before dispatching the agent.

Gate 0.5: Composition Complexity Scan (Conditional)

After Gate 0 passes, scan changed .tsx/.jsx files for composition complexity signals. If no signals are detected, skip this gate entirely (zero overhead).

Detection Heuristics

Signal	Threshold	Detection
Boolean prop count	>=3 boolean props in Props type/interface	Grep: prop?: boolean or prop: boolean
File size + hooks	>200 lines AND >3 useState/useEffect	Line count + hook grep
Conditional branches	>=3 ternaries or && chains tied to boolean props	Pattern: {isX && ...} or isX ? ... : ...

When Triggers Hit

1. Skill("ring:applying-composition-patterns") — load the composition patterns skill
2. Dispatch ring:frontend with flagged files + skill content as context
3. Agent applies patterns in priority order:
   • 1.1 Eliminate boolean prop proliferation (CRITICAL)
   • 1.2 Extract compound components if applicable
   • 2.x Lift state only if warranted
   • 3-4 Apply only if natural fit
4. Re-run tests — all MUST pass; coverage MUST NOT decrease vs Gate 0
5. Commit via ring:committing-changes — expected message: refactor(component): apply composition patterns to <ComponentName>

Safety

• If refactoring breaks tests irrecoverably → rollback to Gate 0 state, skip Gate 0.5, proceed to Gate 7 with note: "Composition refactoring attempted but reverted — review flagged files manually"
• Coverage after refactoring MUST be >= Gate 0 coverage
• Behavior MUST NOT change — refactor structure only (same props in = same render out)

Gate 7: Reviewers

Invoke Skill("ring:reviewing-code"). The ring:reviewing-code skill dispatches its 9 default reviewers plus triggered conditional specialists in parallel and applies its own pass/fail rules.

Gate Completion Criteria

Gate	Required for COMPLETE
0	TDD RED captured (behavioral) + GREEN passes; visual: implementation complete
0.5	Conditional: no complexity signals OR refactored + tests pass + coverage >= Gate 0
7	ring:reviewing-code PASS (all 9 defaults and triggered specialists)
8	Explicit "APPROVED" from user

Former Gates 1-6 checks are owned by Gate 0 implementation and local verification.

State Management

State: docs/ring:running-dev-cycle-frontend/current-cycle.json (state schema v2.0.0).

Write after EVERY gate. If write fails → STOP.

{
  "schema_version": "2.0.0",
  "ui_library_mode": "",
  "tasks_file": "",
  "execution_mode": "",
  "current_gate": 0,
  "phases": [],
  "current_phase": "",
  "phase_checkpoint": {},
  "epics": [],
  "current_epic_index": 0,
  "current_task_index": 0,
  "gates_completed": {},
  "cached_standards": {}
}

Each entry in epics[] (Epic N.M) carries its own tasks[] array (Task N.M.T). Gate 0/8 run at task cadence over epics[current_epic_index].tasks[current_task_index]; Gate 7 runs at epic cadence over the union of that epic's tasks.

Blocker Handling

Blocker	Action
Gate failure	STOP. Fix before proceeding.
Missing PROJECT_RULES.md	STOP. Create using template.
Standards WebFetch fails	STOP. Report.
Architectural decision needed	STOP. Present options to user.