Update Git Hooks

Purpose

This skill allows updating existing git hooks configuration without going through full interactive setup. It preserves current configuration while allowing specific changes.

Prerequisites

Hooks must already be set up. If not, use setting-up-git-hooks skill instead.

# Check if hooks are configured
[ -f .wrangler/config/hooks-config.json ] && echo "Config exists" || echo "Run setting-up-git-hooks first"

Activation Detection

When user runs /wrangler:updating-git-hooks, check if this is first activation:

1. Read .wrangler/config/hooks-config.json
2. Check setupComplete field:
   • If false -> First activation (was inactive)
   • If true or missing -> Reconfiguration (already active)

First activation flow:

1. Detect test framework (now that code exists)
2. Ask for test commands
3. Update hooks-config.json with setupComplete: true
4. Regenerate hooks with actual test commands
5. Update TESTING.md with active status
6. Message: "Git hooks activated! Tests will now run on commits."

Reconfiguration flow:

1. Show current configuration
2. Ask what to change
3. Update config and regenerate hooks
4. Message: "Git hooks updated with new configuration."

Update Workflow

Phase 1: Read Current Configuration

Step 1: Verify Hooks Exist

# Check configuration file
cat .wrangler/config/hooks-config.json

# Check installed hooks
ls -la .git/hooks/pre-commit .git/hooks/pre-push 2>/dev/null

If config doesn't exist, inform user to run setting-up-git-hooks first.

Step 2: Display Current Settings

Present current configuration to user:

## Current Git Hooks Configuration

| Setting | Current Value |
|---------|---------------|
| Test Command | `npm test` |
| Unit Test Command | `npm run test:unit` |
| Format Command | `npm run format` |
| Lint Command | `npm run lint` |
| Protected Branches | main, master, develop |
| Skip Docs Only | true |
| Commit Msg Validation | false |
| Pattern | A (direct installation) |

**Which settings would you like to update?**

Phase 2: Gather Updates

Step 3: Ask What to Update

Use AskUserQuestion:

AskUserQuestion({
  questions: [{
    question: "Which settings would you like to update?",
    header: "Settings to Update",
    options: [
      { label: "Test commands", description: "Full test, unit test commands" },
      { label: "Format/lint commands", description: "Formatter and linter" },
      { label: "Protected branches", description: "Branch patterns for pre-push" },
      { label: "Commit message validation", description: "Enable/disable, pattern" },
      { label: "Docs-only skip patterns", description: "File patterns for skipping tests" },
      { label: "Multiple settings", description: "Update several settings" }
    ],
    multiSelect: true
  }]
})

Step 4: Gather New Values

For each setting being updated, ask for new value:

Test Commands:

AskUserQuestion({
  questions: [{
    question: "What is your full test command?",
    header: "Test Command",
    options: [
      { label: "Keep current", description: "[current value]" },
      { label: "Custom", description: "I'll type a new command" }
    ],
    multiSelect: false
  }]
})

Repeat for each selected setting category.

Phase 3: Update Configuration

Step 5: Backup Current Config

# Create backup
cp .wrangler/config/hooks-config.json .wrangler/config/hooks-config.json.backup

# Record timestamp
echo "Backup created at: $(date)" >> .wrangler/config/hooks-config.json.backup

Step 6: Update Configuration File

Use Edit tool to update .wrangler/config/hooks-config.json:

1. Read current config
2. Parse JSON
3. Update only changed fields
4. Update updatedAt timestamp
5. Write back to file

{
  "version": "1.0.0",
  "createdAt": "[original timestamp]",
  "updatedAt": "[new timestamp]",
  "testCommand": "[updated if changed]",
  // ... other fields
}

Phase 4: Regenerate Hooks

Step 7: Regenerate Hook Files

Read the hook templates from wrangler skills directory and regenerate with new configuration:

For Pattern A:

# Hooks are in .git/hooks/
# Regenerate each hook with new config values

For Pattern B:

# Hooks are in .wrangler/config/git-hooks/
# Regenerate and keep symlinks intact

Use same parameterization as setting-up-git-hooks:

• Replace {{TEST_COMMAND}} with new test command
• Replace {{UNIT_TEST_COMMAND}} with new unit test command
• etc.

Step 8: Preserve Permissions

chmod +x .git/hooks/pre-commit
chmod +x .git/hooks/pre-push
[ -f .git/hooks/commit-msg ] && chmod +x .git/hooks/commit-msg

Phase 5: Verification

Step 9: Verify Update

# Show updated config
echo "=== Updated Configuration ==="
cat .wrangler/config/hooks-config.json

# Verify hooks are executable
echo ""
echo "=== Hook Status ==="
for hook in pre-commit pre-push commit-msg; do
    if [ -f .git/hooks/$hook ]; then
        if [ -x .git/hooks/$hook ]; then
            echo "[OK] $hook"
        else
            echo "[WARN] $hook not executable"
        fi
    fi
done

Step 10: Summary

## Git Hooks Updated

### Changes Made

| Setting | Old Value | New Value |
|---------|-----------|-----------|
| Test Command | `npm test` | `npm run test:all` |
| Protected Branches | main, master | main, master, develop |

### Files Modified

- `.wrangler/config/hooks-config.json` - Updated configuration
- `.git/hooks/pre-commit` - Regenerated
- `.git/hooks/pre-push` - Regenerated

### Backup Created

Original config saved to: `.wrangler/config/hooks-config.json.backup`

### Test Your Changes

```bash
# Trigger pre-commit hook
git commit --allow-empty -m "test: verify hooks"

# Or check hook directly
./.git/hooks/pre-commit

## Edge Cases

### Adding Commit Message Validation

If enabling commit-msg validation when it wasn't before:

1. Read `commit-msg.template.sh` from templates
2. Parameterize with config values
3. Write to `.git/hooks/commit-msg`
4. Make executable

### Removing Commit Message Validation

If disabling commit-msg validation:

```bash
# Remove the hook
rm .git/hooks/commit-msg

# Keep config flag as false

Switching Patterns

Switching from Pattern A to Pattern B (or vice versa) requires full re-setup:

This change requires full re-setup.
Run /wrangler:setting-up-git-hooks to change installation patterns.

No Changes Detected

If user doesn't change anything:

No changes made to configuration.
Your git hooks remain as configured.

Rollback

If something goes wrong:

# Restore from backup
cp .wrangler/config/hooks-config.json.backup .wrangler/config/hooks-config.json

# Regenerate hooks with original config
# Run /wrangler:updating-git-hooks to regenerate

Related Skills

• setting-up-git-hooks - Initial hook installation
• running-tests - Manual test execution
• practicing-tdd - TDD workflow with hooks
• verifying-before-completion - Verification requirements

Common Updates

Add a Protected Branch

# Current: ["main", "master"]
# Updated: ["main", "master", "develop", "release/*"]

Change Test Command

# Current: "npm test"
# Updated: "npm run test:ci"

Enable Commit Message Validation

# Current in .wrangler/config/hooks-config.json: enableCommitMsgValidation: false
# Updated: enableCommitMsgValidation: true

Update Docs Patterns

# Current in .wrangler/config/hooks-config.json: ["*.md", "docs/*"]
# Updated: ["*.md", "*.txt", "docs/*", "README*", "CHANGELOG*"]