Embedded Cryptographic Operations Skill

Expert skill for cryptographic operations in embedded systems. Provides expertise in hardware crypto accelerators, secure key storage, TrustZone configuration, and security best practices.

Overview

The Embedded Crypto skill enables secure cryptographic implementation in embedded systems:

• Hardware crypto accelerator usage
• AES/SHA/ECC implementation
• Secure key storage configuration
• TrustZone configuration (Cortex-M33/M55)
• Secure boot chain implementation
• Certificate management
• Random number generation (TRNG)
• Side-channel attack mitigation

Capabilities

1. Hardware Crypto Accelerator Integration

Leverage hardware acceleration for cryptographic operations:

/**
 * @brief Initialize hardware crypto accelerator
 *
 * Enables clock and configures the crypto peripheral for
 * accelerated AES, SHA, and random number generation.
 *
 * @return CRYPTO_OK on success
 */
crypto_status_t crypto_hw_init(void)
{
    // Enable peripheral clock
    RCC->AHB2ENR |= RCC_AHB2ENR_CRYPTEN;

    // Enable AES, SHA, and RNG modules
    CRYP->CR = CRYP_CR_ALGODIR | CRYP_CR_ALGOMODE_AES_CBC;

    // Configure for interrupt or DMA mode
    CRYP->CR |= CRYP_CR_CRYPEN;

    return CRYPTO_OK;
}

/**
 * @brief Hardware-accelerated AES-128 CBC encryption
 *
 * @param[in]  key        128-bit encryption key
 * @param[in]  iv         128-bit initialization vector
 * @param[in]  plaintext  Data to encrypt
 * @param[out] ciphertext Encrypted output
 * @param[in]  length     Data length (must be multiple of 16)
 *
 * @return CRYPTO_OK on success
 */
crypto_status_t crypto_aes128_cbc_encrypt(
    const uint8_t key[16],
    const uint8_t iv[16],
    const uint8_t *plaintext,
    uint8_t *ciphertext,
    size_t length
);

2. Secure Key Storage

Configure secure key storage mechanisms:

/**
 * @brief Key storage locations and protection levels
 */
typedef enum {
    KEY_STORAGE_RAM,          // Volatile, cleared on reset
    KEY_STORAGE_OTP,          // One-time programmable fuses
    KEY_STORAGE_SECURE_FLASH, // Encrypted flash with RDP
    KEY_STORAGE_TRUSTZONE,    // TrustZone secure region
    KEY_STORAGE_HSM,          // External secure element
} key_storage_t;

/**
 * @brief Key attributes for secure storage
 */
typedef struct {
    uint32_t id;              // Key identifier
    key_storage_t location;   // Storage location
    uint32_t algorithm;       // Key algorithm (AES, ECC, etc.)
    uint16_t bits;            // Key size in bits
    uint32_t usage;           // Allowed operations (encrypt, sign, etc.)
    uint32_t lifetime;        // Persistent or volatile
    uint8_t exportable;       // Can key be exported
} key_attributes_t;

/**
 * @brief Import key into secure storage
 *
 * @param[in]  attributes  Key attributes
 * @param[in]  data        Key material
 * @param[in]  length      Key length
 * @param[out] key_id      Assigned key ID
 *
 * @return CRYPTO_OK on success
 */
crypto_status_t secure_key_import(
    const key_attributes_t *attributes,
    const uint8_t *data,
    size_t length,
    uint32_t *key_id
);

3. TrustZone Configuration (ARMv8-M)

Configure TrustZone for secure/non-secure separation:

/**
 * @brief TrustZone memory region configuration
 *
 * Memory Map with TrustZone:
 *
 * Address Range       | Security | Purpose
 * --------------------|----------|------------------
 * 0x00000000-0x0001FFFF | Secure  | Secure bootloader
 * 0x00020000-0x0007FFFF | NS      | Non-secure app
 * 0x10000000-0x1000FFFF | Secure  | Secure code/data
 * 0x20000000-0x20007FFF | Secure  | Secure RAM
 * 0x20008000-0x2001FFFF | NS      | Non-secure RAM
 * 0x40000000-0x4FFFFFFF | NS-call | Peripherals (SAU)
 */

/**
 * @brief Configure SAU regions for TrustZone
 */
void sau_configure(void)
{
    // Region 0: Non-secure flash (application)
    SAU->RNR = 0;
    SAU->RBAR = 0x00020000U;  // Base address
    SAU->RLAR = 0x0007FFFFU | SAU_RLAR_ENABLE_Msk;  // Non-secure

    // Region 1: Non-secure RAM
    SAU->RNR = 1;
    SAU->RBAR = 0x20008000U;
    SAU->RLAR = 0x2001FFFFU | SAU_RLAR_ENABLE_Msk;

    // Region 2: Non-secure callable (NSC) for secure API
    SAU->RNR = 2;
    SAU->RBAR = 0x0001F000U;
    SAU->RLAR = 0x0001FFFFU | SAU_RLAR_NSC_Msk | SAU_RLAR_ENABLE_Msk;

    // Enable SAU
    SAU->CTRL = SAU_CTRL_ENABLE_Msk;
}

/**
 * @brief Secure function exposed to non-secure world
 *
 * @note Function must be in NSC region
 */
__attribute__((cmse_nonsecure_entry))
int32_t secure_encrypt(uint8_t *data, size_t length)
{
    // Validate non-secure pointer
    if (cmse_check_address_range(data, length, CMSE_AU_NONSECURE) == NULL) {
        return CRYPTO_ERR_INVALID_PARAM;
    }

    // Perform encryption in secure world
    return crypto_aes128_encrypt_internal(data, length);
}

4. True Random Number Generation

Implement secure random number generation:

/**
 * @brief Initialize hardware TRNG
 *
 * Configures the true random number generator with
 * health tests and conditioning.
 *
 * @return CRYPTO_OK on success, error if health test fails
 */
crypto_status_t trng_init(void)
{
    // Enable RNG clock
    RCC->AHB2ENR |= RCC_AHB2ENR_RNGEN;

    // Configure health tests
    RNG->CR |= RNG_CR_CED;  // Clock error detection
    RNG->CR |= RNG_CR_RNG_CONFIG3;  // Conditioning

    // Enable RNG
    RNG->CR |= RNG_CR_RNGEN;

    // Wait for first random number and verify
    if (!trng_health_test()) {
        return CRYPTO_ERR_HEALTH_TEST;
    }

    return CRYPTO_OK;
}

/**
 * @brief Generate cryptographically secure random bytes
 *
 * @param[out] output  Buffer to fill with random data
 * @param[in]  length  Number of random bytes to generate
 *
 * @return CRYPTO_OK on success
 *
 * @note Blocks until sufficient entropy available
 */
crypto_status_t trng_generate(uint8_t *output, size_t length);

5. Certificate Management

Handle X.509 certificates for device identity:

/**
 * @brief Device certificate chain
 *
 * Chain structure:
 * 1. Device certificate (leaf)
 * 2. Intermediate CA certificate
 * 3. Root CA certificate (optional, often trusted by peer)
 */
typedef struct {
    uint8_t *device_cert;
    size_t device_cert_len;
    uint8_t *intermediate_cert;
    size_t intermediate_cert_len;
    uint8_t *root_cert;
    size_t root_cert_len;
} cert_chain_t;

/**
 * @brief Verify certificate chain validity
 *
 * @param[in] chain     Certificate chain to verify
 * @param[in] trusted   Trusted root certificates
 *
 * @return CRYPTO_OK if valid, error code otherwise
 */
crypto_status_t cert_verify_chain(
    const cert_chain_t *chain,
    const cert_store_t *trusted
);

/**
 * @brief Extract public key from certificate
 *
 * @param[in]  cert      DER-encoded certificate
 * @param[in]  cert_len  Certificate length
 * @param[out] pubkey    Extracted public key
 *
 * @return CRYPTO_OK on success
 */
crypto_status_t cert_get_public_key(
    const uint8_t *cert,
    size_t cert_len,
    public_key_t *pubkey
);

6. Side-Channel Attack Mitigation

Implement countermeasures against side-channel attacks:

/**
 * @brief Side-channel resistant comparison
 *
 * Compares two buffers in constant time to prevent
 * timing attacks.
 *
 * @param[in] a       First buffer
 * @param[in] b       Second buffer
 * @param[in] length  Number of bytes to compare
 *
 * @return 0 if equal, non-zero otherwise
 */
int crypto_compare_constant_time(
    const uint8_t *a,
    const uint8_t *b,
    size_t length
)
{
    uint8_t result = 0;
    for (size_t i = 0; i < length; i++) {
        result |= a[i] ^ b[i];
    }
    return result;
}

/**
 * @brief AES with masking countermeasure
 *
 * Applies random masking to intermediate values
 * to protect against DPA attacks.
 */
typedef struct {
    uint8_t key_masked[16];
    uint8_t mask[16];
    uint8_t state_mask[16];
} aes_masked_ctx_t;

/**
 * @brief Initialize AES with random mask
 */
crypto_status_t aes_masked_init(
    aes_masked_ctx_t *ctx,
    const uint8_t key[16]
)
{
    // Generate random mask
    trng_generate(ctx->mask, 16);

    // XOR key with mask
    for (int i = 0; i < 16; i++) {
        ctx->key_masked[i] = key[i] ^ ctx->mask[i];
    }

    return CRYPTO_OK;
}

Process Integration

This skill integrates with the following processes:

Process	Integration Point
secure-boot-implementation.js	Crypto verification and signing
functional-safety-certification.js	Security certification aspects
ota-firmware-update.js	Update encryption and signing

Workflow

1. Security Requirements Analysis

## Security Requirements Checklist

- [ ] Identify assets to protect (keys, data, code)
- [ ] Determine threat model (local, network, physical)
- [ ] Select appropriate algorithms (AES-128/256, ECC P-256)
- [ ] Define key management strategy
- [ ] Plan for side-channel resistance
- [ ] Identify certification requirements (PSA, SESIP, CC)

2. Hardware Capability Assessment

# Check for crypto accelerator
grep -i "crypto\|aes\|sha\|rng" device_datasheet.pdf

# Verify TrustZone support (Cortex-M33/M55)
arm-none-eabi-gcc -mcpu=cortex-m33 -print-multi-lib | grep cmse

3. Implementation

// Initialize crypto subsystem
crypto_hw_init();
trng_init();

// Import device key
key_attributes_t attr = {
    .algorithm = KEY_ALG_AES,
    .bits = 128,
    .usage = KEY_USAGE_ENCRYPT | KEY_USAGE_DECRYPT,
    .location = KEY_STORAGE_TRUSTZONE
};
secure_key_import(&attr, device_key, 16, &key_id);

// Configure TrustZone (if available)
sau_configure();

4. Security Testing

# Run static analysis for crypto issues
cppcheck --enable=security src/crypto/

# Check for timing vulnerabilities
python tools/timing_analysis.py build/firmware.elf

# Verify random number quality
python tools/rng_test_suite.py

Output Schema

{
  "cryptoCapabilities": {
    "hardware": {
      "aes": true,
      "sha": true,
      "ecc": false,
      "trng": true
    },
    "trustzone": true,
    "secureElement": false
  },
  "keyManagement": {
    "storageLocations": ["otp", "trustzone"],
    "algorithms": ["aes-128-gcm", "ecdsa-p256"],
    "keyCount": 5
  },
  "implementation": {
    "library": "mbedtls",
    "hwAcceleration": true,
    "sideChannelProtection": true
  },
  "compliance": {
    "psaLevel": 1,
    "certifications": ["PSA Certified Level 1"]
  },
  "artifacts": [
    "src/crypto/crypto_hal.c",
    "src/crypto/trustzone_config.c",
    "src/crypto/key_storage.c",
    "docs/security-architecture.md"
  ]
}

Security Best Practices

Key Management

• Never store keys in plaintext in flash
• Use OTP fuses for root keys
• Implement key derivation for session keys
• Zeroize keys after use

Algorithm Selection

• Use AES-GCM for authenticated encryption
• Use ECDSA P-256 for signatures
• Use SHA-256 minimum for hashing
• Avoid deprecated algorithms (DES, MD5, SHA-1)

Implementation

• Use vetted crypto libraries (mbedTLS, wolfSSL)
• Enable hardware acceleration when available
• Implement constant-time operations
• Clear sensitive data from memory

Testing

• Verify TRNG output quality
• Test for timing vulnerabilities
• Validate certificate handling
• Audit crypto configurations

References

• ARM TrustZone for ARMv8-M
• mbedTLS Documentation: https://tls.mbed.org/
• wolfSSL Manual: https://www.wolfssl.com/docs/
• PSA Certified: https://www.psacertified.org/
• NIST Cryptographic Standards

See Also

• secure-boot-implementation.js - Secure boot process
• ota-firmware-update.js - Secure updates
• SK-015: OTA Update skill
• AG-005: Embedded Security Expert agent