/install-clamav

You are tasked with installing and configuring ClamAV (command-line antivirus) and ClamTK (GUI frontend) on this Linux system if they are not already installed.

Your Task

Set up a complete antivirus solution using ClamAV with the ClamTK graphical interface for easy management.

Installation Steps

1. Check Current Installation Status

• Verify if ClamAV is already installed: dpkg -l | grep clamav
• Verify if ClamTK is already installed: dpkg -l | grep clamtk
• If both are installed and working, inform the user and skip to configuration verification

2. Install Packages (if needed)

Install the following packages using apt:

• clamav - Core antivirus engine
• clamav-daemon - ClamAV daemon for background scanning
• clamav-freshclam - Virus definition updater
• clamtk - Graphical user interface for ClamAV

Use sudo for installation.

3. Initial Configuration

After installation:

• Stop the freshclam service: sudo systemctl stop clamav-freshclam
• Update virus definitions manually first: sudo freshclam
• Start the freshclam service: sudo systemctl start clamav-freshclam
• Enable freshclam to start on boot: sudo systemctl enable clamav-freshclam

4. Configure ClamAV Daemon

• Start the ClamAV daemon: sudo systemctl start clamav-daemon
• Enable it for automatic startup: sudo systemctl enable clamav-daemon
• Verify daemon is running: sudo systemctl status clamav-daemon

5. Verify Installation

• Check ClamAV version: clamscan --version
• Check virus definition database date: sudo freshclam --version and verify freshclam status
• Verify ClamTK launches: Inform user they can test by running clamtk from terminal or application menu

6. Initial Scan Setup Recommendations

Provide guidance on:

• Running a quick test scan: clamscan -r /home/[username]/Downloads
• Setting up scheduled scans via ClamTK
• Configuring scan exclusions if needed
• Understanding quarantine location

Post-Installation Information

Provide the user with:

• Location of ClamAV logs: /var/log/clamav/
• How to update definitions manually: sudo freshclam
• How to run a full system scan: sudo clamscan -r /
• ClamTK location in application menu (typically under System or Utilities)
• Recommendation to set up automatic scheduled scans via ClamTK GUI

Output Format

CLAMAV/CLAMTK INSTALLATION REPORT

=== INSTALLATION STATUS ===
ClamAV: [Installed/Already Present]
ClamAV Daemon: [Running/Status]
FreshClam: [Running/Status]
ClamTK: [Installed/Already Present]

=== VIRUS DEFINITIONS ===
Last Updated: [date/time]
Database Version: [version]
Signatures: [number]

=== SERVICES STATUS ===
clamav-daemon: [active/inactive]
clamav-freshclam: [active/inactive]

=== NEXT STEPS ===
[Recommendations for first scan, scheduled scans, etc.]

Important Notes

• Use sudo for all installation and system configuration commands
• Handle cases where packages are already installed gracefully
• Ensure virus definitions are updated before declaring success
• Verify services are running and enabled
• If any step fails, provide clear error messages and troubleshooting steps
• For Ubuntu/Debian systems, use apt package manager
• Initial virus definition update may take several minutes - be patient